对IPHONE无爱:D

IPHONE的样子见仁见智了,不是很喜欢,也买不起

引用:

原帖由 藕是张力 于 2007-8-5 12:53 发表

外观渣，显示效果渣，价格渣，545454545454 1100最高

1100不好，还是喜欢1110

我看到有人赤裸的炫耀……
和苹果是无缘了……

不能正常使用入了毛用

Apple我就用过nano,真的一点也不喜欢，从此就54apple了

讨厌棒子到讨厌KE850吗？

IPHONE 已经能够全面破解了   
包括接打电话   收发短信    上网   等等所有的功能



Let's start....


U will need::

1. iPhone
2. SIM Reader/Writer (Infinity USB Unlimited, Dynamite Programer(I used this) ,etc...)
3. SilverCard
4. V1 SIM card (U must be able to get Ki number)
5. Download - http://simemu.gsmhosting.net/SIM_EMU_6.01_CFG_v2.1.zip
- http://www.kinforce.com/down/kinforce/supersim/ws109.zip


:reparing your iPhone::



Step 1
MAC - http://www.hacktheiphone.com/iphone_...dding_mac.html
WIN - http://www.hacktheiphone.com/iphone_...g_windows.html

Step 2
For already "fake activated" iPhones ,u need to have the AT&T SIM that it came with iPhone in it to get deactivation to work.

MAC - http://www.hacktheiphone.com/iphone_...intel_mac.html
WIN - http://www.hacktheiphone.com/iphone_...r_windows.html

After this steps U will have an "SuperSim compatible iPhone".


::Getting IMSI,ICCID & Ki number from your SIMs::

Step 1 - Your SIM

1. Put YOUR SIM card in programer
2. Run Woronscan
3. Click on "Tasks" then on "IMSI select" u will get a IMSI number, write it down.
4. Click on "Tasks" then on "Ki search", in pop-up window just click "Search", and wait,Ki extraction has began.(I was waiting for mine 40 min ) When u get it, write it down.

Step 2 - Getting IMSI,ICCID from AT&T SIM card which came with an iPhone

1. Put your AT&T SIM card in programer
2. Click on "Tasks" then on "IMSI select" u will get a IMSI number, write it down.
3. Click on "Tasks" then on "ICC select" u will get a ICCID number, write it down.
4. Close Woronscan
5. Remove SIM from programer

Now U have all "data" to make SuperSim.


::Making SuperSim::

1. Download & extract
http://www.rapi****re.com/files/4693....01_iPhone.rar
1.a Put your Silvercard in programer
2. Run Sim-Emu 6.01 Configurator v2.1
3. Click on Configure tab
4. Click "Read from disk" button
5. Browse to your downloaded Flash&EEPROM files, first double click on SIM_EMU_6.01_iphone.HEX and then double click on SIM_EMU_6.01_iphone_EP.HEX, now they are loaded,positions 0 and 9 are red colored,thats fine.

6. In position 0 , type in YOUR SIM IMSI and Ki, then a AT&T ICCID, for ADN/SMS/FDN# type 161, 15, 4, for SMS Centre type in your carrier SMS center number.

7. Now select position 9, here type only IMSI from AT&T SIM card, NOTHING ELSE!
8. In "Config mode" check "Card" circle button
9. Click on "Write to card" button,when its done, remove card from programer
10. http://www.mobileshop.org/usertech/simcutting.htm
11. Power OFF your iPhone
12. Put your SuperSim in iPhone
13. Power ON iPhone, enjoy!

过程不算复杂，期待有用中国移动成功的案例

真的成功了？能看见中文短信就考虑入个玩玩

引用:

原帖由 czj 于 2007-8-6 11:57 发表
真的成功了？能看见中文短信就考虑入个玩玩

很多中文MAIL显示乱码

奢侈品啊！

引用:

原帖由 藕是张力 于 2007-8-6 12:35 发表


很多中文MAIL显示乱码

那就跟解锁的日版机一样了，兴趣没了

引用:

原帖由 藕是张力 于 2007-8-5 12:53 发表

没有网络信号，怎么上网的？wifi？