好麻烦，老是忘了，难道还没签名版本？

MotioninJoy_050002_x86.zip 这个版本我用的很好没出现你们说的问题 我是WIN7 32位的。不装64版

签名要给微软交钱的，所以民间驱动还有很多山寨驱动都没签名

引用:

原帖由 xiejia31 于 2010-9-18 22:09 发表
MotioninJoy_050002_x86.zip 这个版本我用的很好没出现你们说的问题 我是WIN7 32位的。不装64版

32位不需要禁用，64位才需要

我也装了这个驱动，平时不管数字签名，启动后按键都有用，就是六轴和摇杆没用。

引用一下官方关于64位不使用数字签名的方法，下个软件整一下就行了：

引用:

Extra steps for 64-bit users

Since the MotioninJoy drivers are not signed, every time you want to use MotioninJoy on a x64 machine normally you would have to manually disable the driver signature enforcement by constantly pressing the [F8]-key while your system is booting, until the Windows Boot Menu pops up.
There you choose “Disable Driver Signature Enforcement” and press Enter. This is a pain to do especially when you forget to press F8 yet wanted to use the MiJ drivers….

If you are fed up with pressing F8 and disabling Driver Signature Enforcement every time you boot your computer, there is a way to 'sign' the driver yourself using the Driver Signature Enforcement Overrider program. The downside to this is Test Mode must be on, and it will leave a watermark on the bottom-right corner of your desktop saying so.
Click the link above to download Driver Signature Enforcement Overrider, then run it. You may need to turn UAC off for this work. You will need to sign all the files in the “C:\Program Files\MotioninJoy\ds3\drivers\x64” directory, most notably MijXfilt.sys and xusb21.sys. When you reboot your computer, you can now use the MiJ drivers without having to press F8 at every boot.

[ 本帖最后由 whitegerry 于 2010-9-18 23:06 编辑 ]

改过自动屏蔽驱动签名后貌似桌面就会有水印

没办法，必须这样。